BPBHL - 7210, PEROXIDE HYDROGEN DIOXIDE
- MSDS: BPBHL
- Manufacturer: E M SCIENCE
- Product Name: 7210, PEROXIDE HYDROGEN DIOXIDE
- National Stock Number: 6550-00N033875
Product Identification
Product ID:7210, PEROXIDE HYDROGEN DIOXIDE
MSDS Date:03/01/1991
FSC:6550
NIIN:00N033875
MSDS Number: BPBHL
Responsible Party
GIBBSTOWN, NJ 08027
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 609-354-9200
Cage: 0SK29
Contractor
Telephone: 800-222-0342/609-423-6300
Cage: 63612
Ingredients
HYDROGEN PEROXIDE, 30% (SARA III)
CAS: 7722-84-1
RTECS: MX0900000
Fraction By Weight: 30%
OSHA PEL 1 PPM
ACGIH TLV: 1 PPM
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 70 - 75%
PEROXIDE TO ORIGINAL CONTAINER.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TOXIC AND CORROSIVE BY INGESTION.
EYES: SEVERE DAMAGE, POSSIBLY DELAYED (UP TO 1 WEEK). POSSIBLE
BLINDNESS. INHAL: IRRITATION OF NASAL AND RESPIRATORY PASSAGES,
BLEACHING, BLISTERING OF SKIN ON CONTAC T.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:TOXICOLOGICAL FINDINGS: TESTS ON LAB ANIMALS
INDICATE MATERIAL MAY PRODUCE ADVERSE MUTAGENIC EFTS & CAUSE
TUMORS.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.
First Aid
First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
IMMED FLUSH THOROUGHLY WITH LARGE AMOUNTS OF WATER. EYES:
IMMEDIATELY FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15 MIN. INHAL:
REMOVE TO FRES H AIR; GIVE ARTIFICIAL RESPIRATION IF BREATHING HAS
STOPPED. INGEST: DO NOT INDUCE VOMITING, IF CONSCIOUS, GIVE WATER
FREELY AND GET MED ATTENTION. REMOVE CONTAM CLTHG & WASH BEFORE
REUSE.
Fire Fighting
Flash Point:NONCOMBUSTIBLE
Extinguishing Media:WATER FOG, FLOOD FIRE-EXPOSED CONTAINERS W/WATER TO
COOL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY INTENSIFY A FIRE; GREATER HAZARD AT
ELEVATED TEMPERATURE.
Accidental Release
Spill Release Procedures:EVAC THE AREA OF ALL UNNEC PERSONNEL. WEAR
SUITABLE PROT EQUIP LISTED UNDER EXPOS/PERSONAL PROT. ELIMINATE ANY
IGNITION SOURCES UNTIL THE AREA IS DETERMINED TO BE FREE FROM
EXPLOSION/FIRE HAZARDS. CON TAIN THE RELEASE & ELIM ITS SOURCE,
(SUPP DATA)
Neutralizing Agent:SEE WASTE DISPOSAL METHOD.
Handling
Handling and Storage Precautions:VENT ALL CNTNRS TO PREVENT PRESS
BUILDUP. KEEP UPRIGHT. DO NOT BREATHE VAP. DO NOT GET IN EYES, ON
SKIN OR ON CLOTHING.
Other Precautions:STORE IN COOL, VENT, NON-COMBUST AREA REMOTE FROM
COMBUST, ORGANIC, READILY OXIDIZABLE MATLS & CATALYTIC METALS, PROT
FROM PHYSICAL DMG. RETAINED RESIDUE MAY MAKE EMPTY CNTNRS HAZ; USE
CAUTION. NEVER RETURN UNUSED HYDROGEN (ING 3)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:MATERIAL SHOULD BE HANDLED/TRANSFERRED IN AN APPROVED FUME
HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:RUBBER, NEOPRENE OR EQUIVALENT.
Eye Protection:CHEM WORK GOGG W/FULL LNGTH FSHLD
Other Protective Equipment:PROT CLOTHING (RUBBER, NEOPRENE OR
EQUIVALENT) SHOULD BE WORN WHEN HANDLING THIS MATERIAL. EYEWASH AND
SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health
SPILL PROC:IF THIS CAN BE DONE W/O RISK. TAKE UP & CNTNRIZE FOR PROPER
DISP AS DESCRIBED UNDER DISP. WASTE DISP METH:ADDTNL INFO ON
SPILL-X PROD CAN BE PROVIDED THRU EM SCIENCE TECHNICAL SERVICE
DEPT. (609)354-9200. THE FOLLOWING EM SCIENCE SPILL-X NEUT &
ABOSRB IS RECOM FOR PROD: SX0861, ACID SPILL TREATMENT KIT.
Chemical Properties
Boiling Pt:B.P. Text:221F,105C
Melt/Freeze Pt:M.P/F.P Text:-27F,-33C
Vapor Pres:24 @ 30C
Spec Gravity:1.11 (H*2O=1)
Evaporation Rate & Reference:> 1 (BUAC=1)
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID, SHARP ODOR.
Percent Volatiles by Volume:70
Stability
Stability Indicator/Materials to Avoid:NO
COMBUSTIBLE MATERIALS, ORGANIC MATERIALS, POWDERED METALS, RUST, DIRT.
Stability Condition to Avoid:CONTAMINATION OF KIND; EXCESSIVE HEAT
(GREATLY ACCELERATES DECOMPOSITION, RELEASING OXYGEN GAS).
Hazardous Decomposition Products:OXYGEN WHICH SUPPORTS COMBUSTION.
Disposal
Waste Disposal Methods:COMPLY WITH FED, STATE, & LOC REGS ON REPORTING
RELEASES. REFER TO REGULATORY INFORMATION FOR REPORTABLE QUANTITY
AND OTHER REGULATORY DATA. EM SCIENCE RECOMMENDS SPILL-X
NEUTRALIZERS AND ABSORBENT AG ENTS FOR VARIOUS TYPES OF SPILLS.
(SUPPDATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.